Commit Graph

16380 Commits

Author SHA1 Message Date
german77
5b6545b141 Modify rumble amplification 2020-11-19 11:30:52 -06:00
bunnei
92344da20c
Merge pull request #4936 from lioncash/page
page_table: Allow page tables to be moved
2020-11-18 20:40:10 -08:00
bunnei
abda366362
Merge pull request #4866 from Morph1984/mjolnir-p3-prod
Project Mjölnir: Part 3 - Controller Profiles and Vibration Rework
2020-11-17 20:02:27 -08:00
Lioncash
0ca91ced2d virtual_buffer: Add compile-time type-safety guarantees with VirtualBuffer
VirtualBuffer makes use of VirtualAlloc (on Windows) and mmap() (on
other platforms). Neither of these ensure that non-trivial objects are
properly constructed in the allocated memory.

To prevent potential undefined behavior occurring due to that, we can
add a static assert to loudly complain about cases where that is done.
2020-11-17 20:09:58 -05:00
Lioncash
b3c8997829 page_table: Allow page tables to be moved
Makes page tables and virtual buffers able to be moved, but not copied,
making the interface more flexible.

Previously, with the destructor specified, but no move assignment or
constructor specified, they wouldn't be implicitly generated.
2020-11-17 20:08:20 -05:00
Lioncash
3cfd962ef4 page_table: Add missing doxygen parameters to Resize()
Resolves two -Wdocumentation warnings.
2020-11-17 19:45:20 -05:00
Lioncash
0890451c55 page_table: Remove unnecessary header inclusions
Prevents indirect inclusions for these headers.
2020-11-17 19:43:27 -05:00
Chloe
2dc9dbb809
Merge pull request #4933 from lioncash/nodisc-gpu
[gpu, render_base, rasterizer_interface]: Make use of [[nodiscard]] where applicable
2020-11-18 01:40:03 +11:00
Lioncash
70812ec57b rasterizer_interface: Make use of [[nodiscard]] where applicable 2020-11-17 07:19:13 -05:00
Lioncash
a78021580d render_base: Make use of [[nodiscard]] where applicable 2020-11-17 07:19:12 -05:00
Lioncash
b928fca114 gpu: Make use of [[nodiscard]] where applicable 2020-11-17 07:19:09 -05:00
bunnei
8ace3959a5
Merge pull request #4929 from lioncash/nodiscard-input
motion_input: Mark member functions as [[nodiscard]] where applicable
2020-11-16 21:40:16 -08:00
Morph
e7e8a87927 sdl_impl: Pump SDL Events at 1000 Hz 2020-11-15 23:33:21 -05:00
Morph
b254d528bc configure_input: Accommodate for the mouse input device engine 2020-11-15 23:33:21 -05:00
Morph
ad50209383 hid: Reimplement Begin/EndPermitVibrationSession
Upon further investigation, these commands allow temporary vibrations even when the "Controller Vibration" system setting is disabled. As a result, vibrations are allowed when either the system setting or this flag is set to true. Therefore, we can only block vibrations when both flags are set to false.
2020-11-15 23:33:21 -05:00
Morph
d8ad2f3484 controllers/npad: Load input devices on init 2020-11-15 23:33:21 -05:00
Morph
6f5b942897 configure_input: Update the input profiles for other player tabs 2020-11-15 23:33:21 -05:00
Morph
97b2220a82 general: Fix compiler warnings on linux and miscellaneous changes 2020-11-15 23:33:21 -05:00
Morph
117bdc71e0 sdl_impl: Revert to the "old" method of mapping sticks
Not all controllers have a SDL_GameController binding. This caused controllers not present in the SDL GameController database to have buttons mapped instead of axes.

Furthermore, it was not possible to invert the axes when it could be useful such as emulating a horizontal single joycon or other potential cases. This allows us to invert the axes by reversing the order of mapping (vertical, then horizontal).
2020-11-15 23:33:21 -05:00
Morph
760a9e8693 applets/controller: Change the input button to create input profiles
Co-authored-by: Its-Rei <kupfel@gmail.com>
2020-11-15 23:33:21 -05:00
Morph
30e0d1c973 controllers/npad: Remove the old vibration filter
Previously we used a vibration filter that filters out amplitudes close to each other. It turns out there are cases where this results into vibrations that are too inaccurate. Remove this and move the 100Hz vibration filter (Only allowing a maximum of 100 vibrations per second) from sdl_impl to npad when enable_accurate_vibrations is set to false.
2020-11-15 23:33:21 -05:00
Morph
91c06dae1a input: Disconnect a controller prior to connecting a new one
Some games do not respond to a change in controller type if 1) The controller is not disconnected prior to being reconnected and/or 2) The controller is reconnected instantly after being disconnected.

Since it is not possible to change controllers instantly on hardware and requiring a disconnect prior to connecting a new one, we should emulate this as well with a small delay, fixing the aforementioned issue.
2020-11-15 23:33:21 -05:00
Morph
978ca65f59 hid: Implement InitializeVibrationDevice and IsVibrationDeviceMounted 2020-11-15 23:33:20 -05:00
Morph
e9e1876e82 input_common: Add VibrationDevice and VibrationDeviceFactory
A vibration device is an input device that returns an unsigned byte as status.
It represents whether the vibration device supports vibration or not.
If the status returns 1, it supports vibration. Otherwise, it does not support vibration.
2020-11-15 23:33:20 -05:00
Morph
38110dd485 configure_input: Add per-player vibration
Allows for enabling and modifying vibration and vibration strength per player.
Also adds a toggle for enabling/disabling accurate vibrations.

Co-authored-by: Its-Rei <kupfel@gmail.com>
2020-11-15 23:33:20 -05:00
Morph
d6a41cfc21 settings: Remove global vibration strength modifier
This will be replaced in favor of per-player vibration strength modifiers.
2020-11-15 23:33:20 -05:00
Morph
92fa5257c7 hid: Mark Begin/EndPermitVibrationSession as stubs
The implementation of these commands seem incomplete and causes rumble in Super Mario Party to stop working since only EndPermitVibrationSession is called. Thus, these are better off being marked as a stub until this can be investigated more thoroughly.
2020-11-15 23:33:20 -05:00
Morph
373408ae8c controllers/npad: Send an empty vibration on destruction/deactivation
This stops all controllers from continuously vibrating when emulation is stopped.
2020-11-15 23:33:20 -05:00
Morph
70f16f1722 hid: Stub IsVibrationDeviceMounted
- Used in Super Mario Odyssey
2020-11-15 23:33:20 -05:00
Morph
9b501af8e3 controllers/npad: Add heuristics to reduce rumble state changes
Sending too many state changes in a short period of time can cause massive performance issues.
As a result, we have to use several heuristics to reduce the number of state changes to minimize/eliminate this performance impact while maintaining the quality of these vibrations as much as possible.
2020-11-15 23:33:20 -05:00
Morph
652d6766d5 configure_input: Hook up the vibration percentage spinbox
This allows setting the vibration strength percentage anywhere from 1% to 100%.
Also hooks up the remaining motion button and checkbox in the Controller Applet.
2020-11-15 23:33:20 -05:00
Morph
e02ef3c3be controllers/npad: Stop games from vibrating incorrect controllers
Fixes vibration in 1-2 Switch and potentially other games where they would vibrate both players' joycons at the same time.
2020-11-15 23:33:20 -05:00
Morph
07b81f57ba hid: Fix controller rumble based on new research
This fixes the issue where rumble is only sent to the first controller.
Now, individual controllers can receive their own rumble commands.
2020-11-15 23:33:20 -05:00
Morph
31de52513e hid: Pop a struct of parameters instead of popping individual parameters
Some parameters need to be doubleword aligned due to the presence of the applet_resource_user_id.
Previously, this value was invalid in many commands where it was not doubleword aligned when popped.
2020-11-15 23:33:20 -05:00
Morph
e3c2749986 hid: Reorder all HID commands
Reorders all HID commands in command id order.
2020-11-15 23:33:20 -05:00
Morph
b92bf51ae1 hid: Implement GetVibrationDeviceInfo
The first u32 describes the vibration device type which is a Linear Resonant Actuator used in Nintendo Switch controller hardware.

The second u32 describes the vibration device position, in this case distinguishing between left and right vibration actuators.

Pro Controllers have 2 LRAs each that can vibrate independently of each other, which means they have 2 distinct vibration device handles to distinguish between the two actuators.

Similarly for joycons, the left joycon can be distinguished from the right joycon through the vibration device handle since each joycon has 1 LRA.
2020-11-15 23:33:20 -05:00
Morph
16e2e1c45f hid: Stub InitializeVibrationDevice 2020-11-15 23:33:20 -05:00
Morph
428ce8ec29 controllers/npad: Rename NPadType to NpadStyleSet
This more accurately represents the underlying type and avoids confusion with NpadType
2020-11-15 23:33:20 -05:00
Morph
0a966e2cac controllers/npad: Add DeviceHandle struct
A DeviceHandle describes a vibration device or six-axis sensor based on the npad type, npad id, and device index/position
2020-11-15 23:33:20 -05:00
Morph
ceb7b11f16 configure_input_player: Change "Defaults" button behavior
RestoreDefaults() now restores the selected devices' mappings using UpdateMappingWithDefaults().
This allows us to move the keyboard mapping from RestoreDefaults() to UpdateMappingWithDefaults().
2020-11-15 23:33:20 -05:00
Morph
8f2959f680 settings: Preparation for per-game input settings 2020-11-15 23:33:20 -05:00
Morph
8ead176639 udp/client: Reduce testing period to 5 seconds 2020-11-15 23:33:19 -05:00
Morph
64e174237e config: Migrate config files into config/custom
Co-authored-by: lat9nq <lat9nq@virginia.edu>
2020-11-15 23:33:19 -05:00
Morph
c0c4ed0d3b controllers/npad: Connect a controller on init if none are connected 2020-11-15 23:33:19 -05:00
Morph
5cafa70d3b applets/controller: Auto accept a valid single player configuration 2020-11-15 23:33:19 -05:00
Morph
484623cd61 bootmanager: Allow mouse clicks only if touch is disabled
Previously mouse clicks will not register when touch is disabled.
This rectifies that and allows mouse clicks to be mapped to other buttons if the touchscreen is disabled.
2020-11-15 23:33:19 -05:00
Morph
57d89e291d input_profiles: Implement input profiles 2020-11-15 23:33:19 -05:00
Morph
75eaab2e0f configure_input_player: Implement input exclusivity and persistence
With this, the "Input Devices" combobox should accurately reflect the input device being used and disallows inputs from other input devices unless the input device is set to "Any".
2020-11-15 23:33:19 -05:00
Morph
9d4edd4e88 ui/themes: Cleanup UI 2020-11-15 23:33:19 -05:00
Lioncash
0a50ba3bd1 motion_input: Mark constructor as explicit 2020-11-15 14:20:41 -05:00